Carlos Gomez Technical Docs

Incredible usefull and yet simple post. Be warned ...

2011-11-27T01:33:36.451-08:00

Incredible usefull and yet simple post.
Be warned however that installing
#rpm -ivH OpenIPMI-2.0.16-5.el5.i386.rpm
error: Failed dependencies:
xinetd is needed by OpenIPMI-2.0.16-5.el5.i386

So had to:
#rpm -ivH --force-deps OpenIPMI-2.0.16-5.el5.i386.rpm
Preparing packages for installation...
OpenIPMI-2.0.16-5.el5
#
THanks a lot.

Brilliant! I have been looking for a fix like this...

2011-05-29T03:16:43.003-07:00

Brilliant! I have been looking for a fix like this for days now. Thanks! Buy Backlink

I had this error when installing the amportal: PH...

2011-05-06T01:07:41.932-07:00

I had this error when installing the amportal:

PHP Warning: Invalid argument supplied for foreach() in /usr/src/tbm-pbxconfig- 5.0.0/install_amp on line 159
PHP Notice: Undefined variable: conf in /usr/src/tbm-pbxconfig-5.0.0/install_am p on line 175
[FATAL] FAILED. Have you installed Asterisk?

I can't open my PABX Setting or http://myip/admin

How do I proceed?

I followed exactly the procedure in installing tri...

2011-05-06T01:06:05.344-07:00

I followed exactly the procedure in installing trixbox.. installing memcached failed and have to follow instructions from other site to get a successful install.

I had problem though when installing the amportal.. got this error.

PHP Warning: Invalid argument supplied for foreach() in /usr/src/tbm-pbxconfig- 5.0.0/install_amp on line 159
PHP Notice: Undefined variable: conf in /usr/src/tbm-pbxconfig-5.0.0/install_am p on line 175
[FATAL] FAILED. Have you installed Asterisk?

Now i can't open my PABX Settings or http://myip/admin

How do i proceed with this?

Thanks.

I am getting compile errors on ubuntu make optimi...

2010-12-27T11:50:44.552-08:00

I am getting compile errors on ubuntu

make optimize=1 debug=0
gcc -W -Wall -Wpointer-arith -pipe -DCURL_LOADER_FD_SETSIZE=20000 -D_FILE_OFFSET_BITS=64 -fomit-frame-pointer -O3 -ffast-math -finline-functions -funroll-all-loops -finline-limit=1000 -mmmx -msse -foptimize-sibling-calls -I. -I./inc -I/usr//include -c -o obj/parse_conf.o parse_conf.c
parse_conf.c: In function ‘read_callback’:
parse_conf.c:3894: error: conflicting types for ‘pread’
/usr/include/unistd.h:385: note: previous declaration of ‘pread’ was here
make: *** [obj/parse_conf.o] Error 1

Antonio, yes Openload is ancient but it works.

2010-10-07T10:53:06.349-07:00

Antonio, yes Openload is ancient but it works.

OpenWebLoad is ancient!

2010-10-07T10:22:52.445-07:00

OpenWebLoad is ancient!

@poster, thanks for sharing. @Victor.. I was able...

2010-09-16T12:24:24.962-07:00

@poster, thanks for sharing.

@Victor.. I was able to install gTalk with the help of a link below:

http://www.eukhost.com/forums/f15/install-linux-gui-kde-hud-gtalk-all-one-asterisk-based-trixbox-11957/

this works great, i dont know but i need to change...

2010-08-31T21:08:49.046-07:00

this works great, i dont know but i need to change this lines in order to work

################################
#Ingresado por yb-webadmin
mydomain = myhost.dns.com
myhostname = elastix.myhost.dns.com

Great thanks. It just made my life easier.

2010-08-23T05:18:48.785-07:00

Great thanks. It just made my life easier.

In cent os 5.5 server created the chroot user usin...

2010-07-13T23:33:53.609-07:00

In cent os 5.5 server created the chroot user using this script

grep sakthi /etc/passwd
sakthi:x:633:633::/home/jail/home/sakthi:/bin/chroot-shell

But after creating unable to open the ssh or sftp connections

[root@test ~]# sftp sakthi@localhost
Connecting to localhost...
sakthi@localhost's password:
Connection closed

Regards
Raj

Hi are you trying installing trixbox 2.8 in a VP...

2010-06-15T18:38:22.504-07:00

Hi

are you trying installing trixbox 2.8 in a VPS?

i try following the same procedure but changing the

[trixbox]
name=trixbox RPM Repository for CentOS and RHEL
baseurl=http://yum.trixbox.org/centos/$releasever/RPMS/
gpgcheck=0
enabled=1

to

[trixbox]
name=trixbox RPM Repository for CentOS and RHEL
baseurl=http://yum.trixbox.org/trixbox/2.8/RPMS/
gpgcheck=0
enabled=1

But i get a lot of errors

Good job!! I had some problems, but at the end a...

2010-06-15T18:36:05.960-07:00

Good job!!

I had some problems, but at the end all is working. Im trying of configure gtalk but it only works when is in the same lan. you have some tutorial for trixbox-gtalk? jeje

the problems that i encounter are:
#yum -y install httpd memcached php php-pear php-mysql
No package memcached available

this was resolved with:

# rpm -Uhv http://apt.sw.be/redhat/el5/en/i386/rpmforge/RPMS/rpmforge-release-0.3.6-1.el5.rf.i386.rpm
Retrieving http://apt.sw.be/redhat/el5/en/i386/rpmforge/RPMS/rpmforge-release-0.3.6-1.el5.rf.i386.rpm

# yum -y install memcached
# cd /etc/yum.repos.d
# ls
CentOS-Base.repo CentOS-Media.repo mirrors-rpmforge rpmforge.repo trixbox.repo
# rm mirrors-rpmforge
rm: remove regular file `mirrors-rpmforge'? y
rm rpmforge.repo
rm: remove regular file `rpmforge.repo'? y

# yum clean all

continue with the rest of commands.

Regards
Victor

Hi, Your apache box and curl-loader box do not re...

2010-03-22T07:26:22.984-07:00

Hi,
Your apache box and curl-loader box do not require to be on the same subnet. The subnet IPs that you need for the curl-loader will require to be on the same subnet of the curl-loader so packets can find the route to your machine.

Hi, can you explain it to me in two words. The ip ...

2010-03-21T13:40:22.464-07:00

Hi,
can you explain it to me in two words.
The ip range you specified, shoud i have my "apache box" and "curl-loader box" in the same subnet?
also the IP's should be free and not in use in the subnet by any machine

thanks

When you say "First , get a clean installatio...

2010-03-12T04:18:13.729-08:00

When you say "First , get a clean installation of linux..." does that mean it does something during the install process that could mess up a server that is already running applications and sites?

Hi, Carlos Gomez I Want to set up the LDAP server...

2010-03-11T10:58:05.988-08:00

Hi, Carlos Gomez
I Want to set up the LDAP server on Centos and the clients are in ubuntu , How to configure this.., please help me., pls give me the configuration also.

regs Gary

Hi, thanks for the sharing. What kind of encryptio...

2010-03-05T11:39:44.117-08:00

Hi, thanks for the sharing. What kind of encryption are you using at the LDAP server-side?

Regs, Algey

bonnie++ is nice but it is out of date...iozone is...

2010-02-23T12:59:29.001-08:00

bonnie++ is nice but it is out of date...iozone is also really great, easy to install (available on repos), however it is a little complex. I suggest these tools because are really easy to use and they can give you an idea of how a new HW is behaving.

@ Carlos Gomez "This error is only a warning ...

2010-02-11T09:07:58.606-08:00

@ Carlos Gomez
"This error is only a warning so it should not affect results."

What does that mean? Error != Warning

Aside from the hdparm command, none of these requi...

2010-02-10T16:30:48.825-08:00

Aside from the hdparm command, none of these require root authority and they should NOT be performed while logged in as root or executing within an su(1) environment.

In addition, interested readers will Google for it, but I like bonnie++ and iozone, each for different reasons. With a RHEL5 kernel (or similar) you can also use SystemTap to monitor activities anywhere within the system. Once such example is blktrack (I think that's the name).

Cheers!

Excellent post and writing style. Bookmarked.

2010-02-03T15:14:48.674-08:00

Excellent post and writing style. Bookmarked.

Thanks, probably you should take at http://blog.ca...

2010-02-01T08:11:02.688-08:00

Thanks, probably you should take at http://blog.carlosgomez.net/2009/11/installing-groundworks-6-nagios-on.html

Hi Carlos, Thanks for the post - happy monitoring...

2010-02-01T07:08:51.549-08:00

Hi Carlos,

Thanks for the post - happy monitoring!

Simon
Product guy at GWOS

I just had some success simply installing the open...

2009-12-17T08:03:50.303-08:00

I just had some success simply installing the open-vm-tools / open-vm-toolbox that is officially provided on my Ubuntu 9.10 VM.